Automatic Stirrup Bending Machine

The fully automatic steel stirrup bending machine can automatically complete the processes of straightening, sizing, bending, and cutting of steel bars. It can be bent in two directions and two lines and has very good processing capabilities. At the same time, the return mechanism cooperates with the material rack to complete the production of hook bars and plate bars, realizing one machine with multiple uses. This equipment uses a CNC system and controls the servo system through a touch screen and PLC. The finished stirrups have high processing accuracy, stable and reliable quality, and strong graphic storage capabilities. They are simple to operate and convenient to set up, which can save a lot of labor and waste. Improving processing efficiency is an indispensable part of modern construction buildings, and it is also intelligent equipment that meets national standards.

The fully automatic stirrup bending machine is composed of the motor, gearbox, electrical appliances, frame, etc. First, the electric motor rotates in a clockwise direction, decelerates through the gearbox through the V-belt, and then the main output shaft on the gearbox drives the working plate to rotate. When it reaches the limited angular position, the travel switch at the lower end of the main output shaft meets and cuts off. The travel switch is normally closed. Contact, turn on the normally open contact of the travel switch, and the motor will automatically reverse. When the work plate returns to the stop position, the stop travel switch cuts off the circuit, the motor stops, and the work is completed. 90 degrees and 135 degrees are arbitrarily controlled by two-foot switches.

1. Fully automatic steel bar hoop bending machine production equipment, which also has a straightening function, and is multi-purpose.

2. Using intelligent control, it can process squares, giant shapes, diamonds, polygons, etc. of various sizes and specifications.

3. From wire rod raw materials to stirrup products, it is formed in one step and can process cold and hot-rolled high-strength wire rod steel bars.

4. High production efficiency, equivalent to twenty to thirty laborers.

5. The equipment is highly practical and requires only one person to operate, saving a lot of labor.

6. Save raw materials, and there is almost no loss of steel bars due to continuous forming during work.

7. It occupies a small area, saves the straightening and cutting work areas, and can operate in narrow areas.

8. Equipment maintenance costs and energy consumption costs are very low. Comparison between fully automatic bending hoop forming machine and traditional manual semi-mechanized production: traditional manual semi-mechanized production (straightening---shearing--bending-----forming)