Thermoplastic preheater is one of the main pieces of equipment in the construction of hot melt marking, this equipment adopts integrated multiplex hydraulic stepless torque transmission power, ensuring high performance and high load operation, forward and reverse stir; stainless steel straight spray furnace, energy-saving burner to ensure combustion with high efficiency, time-saving, energy saving, with high melt efficiency.
Thermoplastic Preheater Parameter:
|
Type |
YG800/YG1000/YG1200 |
|
Engine |
15PS electric start evaporates water-cooled diesel engine |
|
Hydraulic drive system |
integrated multiplex hydraulic control valve, forward and reverse stir, CVT |
|
Hydraulic motor |
BM type |
|
Hydraulic tank volume |
40 liters |
|
The kettle |
360 * 2kg / 500 * 2kg / 600 * 2kg, stainless steel cylinder, high-end steel bottom, vertical pulp mixer |
|
Structure |
Multiple heat preservation: normal insulation material, composite insulation material, heat transfer oil |
|
Heating system |
Multiple heating methods: normal LPG burner or LPG energy-efficient burner |
|
Safety device |
Overload relief device specially designed can prevent misoperation |
|
Size |
YG800:1880*1420*1600mm YG800P:1600*1430*1250mm YG1000:1980*1630*1700mm YG1200:2100*1800*1700mm |
|
Net weight |
700kg(YG800)/600kg(YG800P)/1000kg(YG1000)/1200kg(YG1200) |
How to Use the Pre-heater
- During the construction, put powder coating (additives) into the pre-heater first.
- The heating temperature must be controlled between 180 °C ~ 210 °C.
- Keep stirring while melting, until the paint into a homogeneous liquid state. Then, the hot-melt material is ready to be discharged into the thermoplastic machine for marking construction.
- The melting paint quality affects directly the traffic lines marking quality, so the pre-heater is a key part during thermoplastic paint road lines construction and an essential device for thermoplastic paint heating and melting.



