Thermoplastic applicator machine is a kind of equipment specially used for drawing various marking lines on the ground of roads, parking lots, airports, etc. It heats the specially formulated hot-melt paint to melt it and evenly apply it on the road surface to form clear and durable marking lines.
Thermoplastic Applicator Machine Parameter
|
Model |
YG-CK360S |
YG-CK380S |
|
Thermoplastic Tank |
100kg, double stainless steel heating insulation barrels, plug-in manual mixer devices, removable devices |
100kg, double stainless steel heating insulation barrels, plug-in manual mixer devices, removable devices |
|
Glass Bead Container |
10kg/box |
10kg/box |
|
Adjustable glass bead spreader |
synchronous clutch spreading, equipped with a speed-adjustable gear shifting device, single/double spreading can be selected according to needs 50-200mm |
synchronous clutch spreading, equipped with a speed-adjustable gear shifting device, single/double spreading can be selected according to needs 50-200mm |
|
Rear Wheel Directional Device |
Ensure the machine is moving in a straight line or turning freely on the curved road |
Ensure the machine moving in a straight line or turning freely on a curved road |
|
Brake |
Using a drum brake, you can adjust the brake tension |
Using a drum brake, you can adjust the brake tension |
|
Marking width |
Standard 150mm marking bucket |
Standard 150mm marking bucket |
|
Battery Capacity |
15AH |
15AH |
|
Battery Voltage |
48V lithium battery |
48V lithium battery |
|
Driver Speed |
1-8km/hour |
1-8km/hour |
|
Working Duration |
The machine can mark road lines24 hours after charging the battery5 hours |
The machine can mark road lines24 hours after charging the battery5 hours |
|
Dimensions |
1210X970X1070mm |
1200X970X1100mm |
|
Net weight |
130kg |
150kg |
Comparison Between Hot Melt Road Marking Machine and Cold Spray Road Marking Machine
I. Working principle
Hot melt road marking machine: Heat the specially formulated hot melt paint to a molten state, then spray it onto the road surface through a nozzle. After the paint cools down, it solidifies to form a marking line.
Cold spray road marking machine: Use pre-mixed cold paint to spray the paint onto the road surface through high pressure. The solvent in the paint evaporates quickly to form a marking line.
II. Scope of application
Hot melt road marking machine: Suitable for various types of road marking construction, including center lines, lane lines, pedestrian crossing lines, etc. It is especially suitable for occasions with high requirements for the durability of the marking line, such as highways, airport runways, etc.
Cold spray road marking machine: Mainly used for temporary markings, parking lot markings, community markings, etc. Due to its fast construction speed, it is suitable for drawing large-area, short-term markings.
Application of Thermoplastic Road Marking Machine
Thermoplastic road marking machine is widely used in road marking construction in places such as highways, urban roads, airports, and parking lots. It plays an important role in the following aspects:
- New roads: used to draw initial road markings.
- Road maintenance: used to repair worn or damaged markings.
- Road reconstruction: used to adjust road markings to adapt to changes in traffic flow.
