It is used to clean steel structures, molds, fitness and entertainment equipment. Glass, stele carving, ship construction, bridges, mines, machinery, oil pipelines, water conservancy projects, port construction rust removal, spraying processing, descaling, burrs can also be used in spraying, electroplating pretreatment process to improve all surface treatment of the coating (coating) surface. It is used to spray glass balls to strengthen the surface of decorative parts.
A. The sand in the blasting bucket has been used up. After exhausting, add sand.
B. The nozzle is blocked by foreign matter: after shutting down and exhausting, turn the nozzle sleeve down first, check whether there is any foreign matter blocking in the sandblasting, and if there is a foreign body, it can be removed. (Note: When the nozzle sleeve rotates with the iron seat, the nozzle must be upward, and then tap a few times to rotate, otherwise it is easy to cause screw bite or damage).
C. The blasting pipe is blocked by foreign objects:
a. (No sand adjustment model) The pipeline is blocked by foreign matter and excessive sand: after closing the exhaust, first turn the nozzle cover, then inflat, then open the thrust valve, and use the air pressure to blow out the sand and foreign matter in the pipeline; if it is ineffective, the pipeline should be removed or replaced.
b. (with sand conditioner model) the pipeline is blocked by foreign matter and too much sand: after shutting down and exhausting, first turn the nozzle sleeve down, close the sand mixer, then inflate the sandblasting cylinder, and then open the thrust valve, and use the air pressure to blow out the sand and foreign matter in the pipeline; if it is invalid, the pipe should be removed for cleaning or replacement.
