Maintenance method of electric wire saw

Mar 17, 2024

Leave a message

1. Cleaning
1. Do not clean directly with water during use, because there are electronic components and electrical wiring inside the machine, which is easy to get moisture, which is very dangerous. When cleaning, use brushes, gauze and other tools to remove dirt and avoid moisture entering the inside.
2. Do not use hard metal tools when cleaning to avoid scratching the surface.
3. When cleaning, it is best to separate the corners and clean them separately, which will be very convenient.
2. Lubrication
1. Apply some oil to the electric wire saw regularly, especially on the chain and gears.
2. The quality of the lubricant is very critical, and the special lubricant should be selected, and not too much, otherwise the operation will be affected.
3. Adjustments
1. The chain should maintain a suitable tension, and the specific tightness can be adjusted according to the instructions provided by the manufacturer or according to experience.
2. Keep the gears in normal condition and check for wear and damage on the gears.
4. Precautions
1. Try to avoid placing the electric wire saw in a humid or corrosive environment to avoid rust affecting the working effect.
2. The electric wire saw needs to be placed in a dry and ventilated environment.
3. Most electric wire saws come with insurance, and it is very important to use insurance correctly.
4. If there is a fault in use, you should find a solution according to the manual in time.